Outlet, switch & GFCI installation and repair in Greater Atlanta

A GFCI can trip with no load because it detects a ground fault or leakage on the circuit, often from moisture, wiring issues, or a downstream device. It can also trip from a worn GFCI, a loose connection, or an outdated two‑prong conversion with improper grounding. Our licensed Atlanta electricians install and repair GFCIs, verify correct placement in kitchens, baths, garages, and outdoors, and replace unsafe outlets to meet code.

Quick checks:

• Press RESET, then TEST to confirm function.
• Unplug everything downstream and retry.
• Look for moisture, buzzing, or warmth at the outlet.
• Schedule an $89 electrical safety inspection if trips persist.

Need help in Atlanta, GA? Call (678) 201-1668 or book online.

"Bardi's electrician, Mark, was fantastic!" — Mark

Outlet repair pricing depends on the problem and is confirmed after an on-site assessment. We diagnose warm or sparking outlets, buzzing switches, loose plugs, and outdated two-prong receptacles. An $89 Whole-Home Electrical Safety Inspection can pinpoint the issue before repair. We service standard, GFCI, and tamper-resistant outlets, and our work follows the National Electrical Code. Same-day service is available in Atlanta and nearby areas. For replacements, promotions may apply, like Buy 5, Get 1 Free on new outlets/switches with installation.

Need help in Atlanta, GA? Call (678) 201-1668 or book online.

Yes, we install and replace outlets, switches, and dedicated circuits throughout the home. Replacing outlets or switches ranges from $59 to $189+, and replacing dimmers or GFCI outlets ranges from $89 to $189+. Installing basic switches to lights or fans ranges from $150 to $350+, and installing basic outlets ranges from $150 to $350+. Additional installations include TV outlets above fireplaces ranging from $250 to $500+, basic outdoor outlets ranging from $189 to $350+, oven, dryer, or car charger outlets ranging from $289 to $1,000+, hot tub circuits and disconnects ranging from $400 to $2,000+, electric vehicle charger installations ranging from $289 to $1,200+, HVAC circuits and disconnects ranging from $289 to $1,000+, and treadmill circuits ranging from $300 to $900+.

Most homeowners should not repair a broken light switch if it is warm, buzzing, sparking, or part of a multi-way or GFCI circuit. Turn off the breaker and stop using it, then call a licensed electrician. Our team follows the National Electrical Code, installs tamper-resistant devices, and verifies GFCI protection in bathrooms, kitchens, garages, and outdoor areas. We offer same-day electrical repairs in Atlanta and Roswell, plus an $89 Whole-Home Electrical Safety Inspection.

Need help in Atlanta, GA? Call (678) 201-1668 or book online.

"Bardi's electrician, Mark, was fantastic!" — Mark S.

You can replace a simple outlet yourself, but we recommend a licensed electrician for safety and code compliance. In Atlanta, we follow the National Electrical Code, install tamper-resistant outlets, and verify GFCI protection in bathrooms, kitchens, garages, and outdoor areas. We also offer an $89 whole-home electrical safety inspection.

• Shut off the breaker and verify no power.
• Match circuit amp rating and wire size.
• Use TR outlets; add GFCI where required.

Need help in Atlanta, GA? Call (678) 201-1668 or book online.

Yes, you can install a GFCI outlet yourself, but it must be wired and tested exactly to code to be safe. GFCIs need correct line vs. load connections, proper placement in bathrooms, kitchens, garages, and outdoor areas, and tamper-resistant outlets in homes. If you’re unsure, our licensed electricians in Atlanta can install, verify grounding, and test GFCI operation.

Quick checks:

• Turn off the breaker and confirm power is off.
• Identify line and load; cap load if unused.
• Install a tamper-resistant GFCI outlet.
• Test and label “GFCI Protected.”

Need help in Atlanta, GA? Call (678) 201-1668 or book online.